An LG Washer That Would Not Drain in Tinley Park
A Tinley Park homeowner called A+ Appliance Repair and Maintenance about an LG washer that would not drain water, and they had already cleaned the filter without it helping. When a washer will not drain and the filter is already clear, the cause is usually the drain pump itself. Our technician confirmed the drain pump had failed and replaced it, restoring proper draining, then confirmed the washer drained and finished its cycle. A washer that will not drain after the filter has been cleaned is a common, fixable fault, usually the pump.
An LG Washer Holding Water After the Filter Was Already Cleaned in Tinley Park
A homeowner in Tinley Park called A+ Appliance Repair and Maintenance about an LG washer that would not drain water. Notably, they mentioned they had already cleaned the filter, and it had not fixed the problem. That detail is genuinely useful, because it rules out one of the most common causes and points the diagnosis in a clear direction.
Why the cleaned filter is an important clue
When a washer will not drain, the first and easiest thing to check is the drain pump filter or trap, a small accessible filter, often behind a panel at the lower front, that catches coins, lint, and small items. A clogged filter is one of the most common reasons a washer stops draining, and cleaning it out is exactly the right first step. This customer had already done that, and the washer still would not drain. So the easy cause was already eliminated, which means the problem lies deeper, most commonly in the drain pump itself.
The drain pump is the component that actually pumps the water out of the tub. When the filter is clear but the machine still will not drain, the usual culprit is that the pump has failed, its motor no longer running or its impeller no longer moving water, or there is an obstruction lodged in the pump beyond the filter. Because the homeowner had already cleared the filter, our technician could focus on the pump, and that is where the failure was.
The repair
Our technician confirmed the drain pump had failed and replaced it, restoring the washer's ability to pump the water out of the tub. With a working pump, the machine could drain and then advance to spin, so it finished its cycle with the clothes wrung out instead of sitting in water. Our technician confirmed the washer drained fully and completed a cycle, verifying the repair under real operation. On a not-draining complaint, confirming the machine drains and finishes is the measure of a completed repair.
Why draining matters to the whole cycle
It is worth noting that a washer that will not drain usually will not spin either, because the machine is designed to remove the water before it spins. So a failed drain pump does not just leave standing water, it leaves the whole load soaking wet, since the washer cannot move on to wring the clothes out. Restoring the drain pump fixes both, the water clears and the machine can then spin. That is why the drain pump is such a key component and why a drain problem is worth a prompt repair.
About A+ Appliance Repair and Maintenance
We service LG, Samsung, Whirlpool, Maytag, GE, and every other major washer brand throughout Tinley Park and the surrounding communities. Our technicians are certified and carry common parts, including drain pumps, so a repair like this can usually be done in a single visit.
We quote the price upfront before any work begins, we waive the service call fee when you move forward with the repair, and every completed repair is backed by our full repair warranty. If your washer will not drain even after you have cleaned the filter, we can find the cause and restore proper draining.
