The dishwasher in a DCS kitchen is a drawer
DCS is known for grills and pro-style ranges. It is not a dishwasher maker. Fisher and Paykel bought DCS in 2004, and that company builds the DishDrawer. So a DCS kitchen from those years often has a DishDrawer next to the range. Some have one drawer. Others have two stacked drawers that run on their own. Today DCS sells outdoor products, and no dishwasher is in its line. We still fix the drawers that are out there. Our DCS repair page explains the brand split.
How a drawer dishwasher differs from a door model
A normal dishwasher has a door that drops down. A drawer unit slides out like a deep kitchen drawer. The tub moves with it. A lid comes down on the tub to seal it when a wash starts. The hoses and wires flex every time you open it. Each drawer has its own small motor, filter and spray arm. That layout is handy, and it also sets the list of things that wear out.
Faults we find on these drawers
- Water under the unit and a flood fault. On the Fisher and Paykel DishDrawer, F1 means the flood switch tripped.
- Dirty water left in the tub. The filter is packed, the drain hose is kinked, or the drain side of the motor is jammed.
- No water coming in. We test the inlet valve and check the supply tap under the sink.
- Leaks at the front edge. The lid seal is worn or a tall dish kept the lid from closing.
- A drawer that beeps and will not start. The drawer is not fully shut or a wire link has broken from years of flexing.
- Dishes that come out gritty. The spray arm holes are blocked or the filter plate is out of place.
If the drawer shows a flood fault, act fast. Turn off the water tap that feeds the dishwasher. It is often under the sink. Do not keep pressing start. Water in the base pan has to be found and dried first. Look for a plate or pan handle that stuck up too high. Check that the drain hose under the sink is not bent flat. Then call us. We pull the unit, find the leak and dry the pan so the fault clears for good.
Simple checks that fix a slow drain
Lift out the spray arm and the filter plate in the bottom of the tub. Rinse the filter under the tap. Look in the sump for glass, fruit labels or bone chips. If a new garbage disposal went in, check that its drain plug was knocked out. Run a short rinse after that. If water still sits, the fault is past what you can reach.
Visit cost and how we quote
A tech comes to your home for a $79 diagnostic. He runs the drawer through a test cycle and reads any stored faults. Then you hear a fixed price that covers the part and the labor. Approve it and we waive the $79. The same goes for the $119 stacked or double unit call. Nothing starts until you agree. The tech holds a license and insurance and cleared a background check. His work is backed by a 30-day repair warranty. We are an independent shop, so we say plainly when a repair is not worth it.
When a drawer unit is worth fixing
A seal, an inlet valve or a drain fix is a small job. Those make sense on almost any drawer. A failed control board or motor on a very old unit is a closer call. A drawer dishwasher fits a special cabinet opening. A standard dishwasher may not slide into that space without cabinet work. We weigh that for you on the spot.
Areas we cover for drawer dishwashers
Many of these kitchens are in Chicago, Naperville and the North Shore. See our Illinois service page for the list. Homes near Houston, in the L.A. basin, around D.C. and in Northern Virginia get visits too, often the same day. For other makes, start at our main dishwasher repair page. If the range beside it is acting up too, see DCS range repair. One last tip for double drawers. If only the top drawer fails, keep using the bottom one. They run apart from each other.