Professional Dryer Repair in Hinsdale, IL
Gas dryer not heating, or worried about the old hookup behind it? We repair dryers in Hinsdale, IL, and check the gas connector on every call. We test the igniter, coils and vent and quote up front. A Hinsdale visit the same day is often possible, any day of the week.

Old gas connectors behind Hinsdale dryers
In older houses, the gas dryer may still hang on an uncoated brass flex connector. Safety groups have warned for years that these older connectors can crack at the flare nut. Moving the dryer to clean behind it puts stress on them. A newer coated stainless connector is the safer choice. We also check that a shutoff valve sits within reach. After that comes the dryer, with its igniter and its valve coils.
Hinsdale gas dryer service
We look at the gas hookup with a leak detector before touching anything else. If the connector is the old brass kind, we recommend replacing it on the spot. Then we move on to the heat and airflow. Repairs to the igniter or valve coils are fair priced on most dryers. Hinsdale owners hear the figure before any fitting is loosened, and a 30-day repair warranty follows the work.




Dryers in Hinsdale's historic houses
Hinsdale's historic houses were built long before the dryer, so the laundry went into the basement later. The vent from there is a long climb to an outside wall, often with old metal duct and several bends. Lint packs into the bends, and the dryer runs long and hot. Then the thermal fuse trips and the drum turns with no heat. We clear the run, replace the fuse and test the element or gas igniter. A dryer that thumps has a flat drum roller. One that squeals has a dry bearing or a worn belt. All of it gets one fixed price. The $79 fee is waived with the repair. The same goes for the $119 stacked or double unit call. Call (312) 598-9111.

