Dependable Grill Repair in Elmhurst, IL
Elmhurst grill with one dead burner, or burners that will not light from each other? Our techs bring Elmhurst carts and built-ins back to full flame by clearing orifices and crossover tubes. The $79 diagnostic is waived when your Elmhurst repair goes ahead, and the price is fixed first. The same goes for the $119 stacked or double unit call.

Orifices and crossover tubes on Elmhurst grills
Each burner on an Elmhurst grill gets gas through a brass orifice no wider than a pin. Rust flakes or insect eggs can block it. Then that burner runs low or not at all, while the others look normal. A crossover tube lets flame pass from one lit burner to the next. When it clogs, you must light each burner by hand. Side burners have their own orifice and can clog the same way. A firebox with thin rust spots heats slowly and unevenly. Our tech clears each orifice, cleans the crossover tube and inspects the firebox.
How an Elmhurst grill visit runs
An Elmhurst visit opens with bubble solution on the hose and fittings, then a burner by burner light test. Orifice and crossover work is quick and costs little. A firebox with holes may mean a new cart grill is a better buy, and we tell you that. Elmhurst grill owners agree on a set price before work. If the orifice or tube repair goes ahead, the $79 diagnostic is not charged. The same goes for the $119 stacked or double unit call.


Gas grills left out through an Elmhurst winter
An Elmhurst patio grill spends the winter under snow. Cold stiffens the gas hose and can crack the fittings. Wet burner tubes rust from the inside, and spiders move in when spring warms up. Then the flame lifts off the burner, or one side stays cold. A grill with no spark at all often has a dead battery in the igniter. We start by cleaning the burners and the tubes. Then we test the hose and the regulator, the valve that sets gas pressure. Any burner that has rusted through gets replaced. Your Elmhurst grill is ready before the first cookout.

